Back to VMWare finally

Now that I have space to play with on the CX3-20 I can return to moving forward with VMWare. My plan is to use all of our FC drive for VMWare and databases. Currently I'm using most of our FC disk for a file server. I've set a LUN migration job to migrate the meta-LUN we created on the FC disk over to a 8TB LUN I created on our new SATAII drives.

The LUN migration processes if very easy and straight forward within Navisphere. It's going to take a couple of days to migrate the 3.5TB LUN over. I've started this yesterday and set the priority to ASAP. BTW this LUN is in production and our user base isn't being affected at all.

So I've connected out second ESX server to our FC network and zoned it to the CX3-20. I've installed VMWare Virtual Center on a windows 2003 server to manage both of our hosts. Just getting that done was a huge learning curve. Thanks to the forums and searching I was able to figure it out. Maybe I'll make a post about the steps to setting up Virtual Center and two hosts on a SAN.

Now I'm going to test VMotion to see how that works for myself.

OK so I've done it a manual VMotion move from host to host and it worked like a charm.

Now time to clean up mu LUNs and create a huge LUN for all my guest OS and share that between both hosts.

emc CX300 to CX3-20 conversion done

The conversion is finally done. The hardware has been sitting behind my desk for months and this weekend it finally happened. It went off without a hitch and it took about 7 hours as expected. The Dell guy knew exactly what he was doing and as he should have. Prior to the conversion I prepped the rack by moving the DAE's up 1U to make space at the bottom for the new storage processor 1U unit. If I hadn't done that it would have taken an extra hours to move all that stuff up.

We've also added our 5th DAE with 1TB SATAII drives for a total of 15TB. After the hot spare and the LUN overhead I've got ~12.5TB to play with.